Wall Mounting

**markrh** · 13-02-12, 18:12

Originally Posted by TK4|2|1

The instructions have a step missing. The very last step is to exit the menu, and providing you have a channel list installed, select a channel off 1deg west. Then align the dish.

Sent from my iThing using sorcery and the magic interweb

cool, I think I'm sorted now. thanks!

**markrh** · 16-02-12, 15:39

Originally Posted by digicon

Hi Mate,

Although the motor manual says 54 lat and 27.4 dish elevation take it with a pinch of salt.

First off if your latitude is 51.4979° then on your actual motor bracket you should set the marker to 51.5 i know there is no half marks on the motor lat bracket just try and get it in between 51 and 52.

Next set your dish angle at a starter point of around 27 but be prepared to adjust up and down to get the best signal, and obviously you will also need to adjust the motor and dish left and right on the pole to peak your signal.

best of luck

thanks everyone totally sorted now (hopefully)

I noticed that digicon, the instructions aren't 100%. The biggest improvement was rotating the [Only registered and activated users can see links. ] a little - my signal went up from around 70 to around 90, I think that's what [Only registered and activated users can see links. ] skew is?

Anyway I'm looking forward to some FA cup action in hd this weekend

**digicon** · 16-02-12, 16:20

Originally Posted by markrh

thanks everyone totally sorted now (hopefully)

I noticed that digicon, the instructions aren't 100%. The biggest improvement was rotating the [Only registered and activated users can see links. ] a little - my signal went up from around 70 to around 90, I think that's what [Only registered and activated users can see links. ] skew is?

Anyway I'm looking forward to some FA cup action in hd this weekend

Glad you sorted it Mate, although be careful how mush skew you put on as the idea of a motorised dish is when the dish moves the skew is set by this and not the [Only registered and activated users can see links. ], Thats why more or less your [Only registered and activated users can see links. ] should be dead straight near enough when its on 0.8° west.

Good to see you up and running