Xtrend ET Control Centre V1.2

[YODA]

[Only registered and activated users can see links. ] ET Control Centre V1.2 by Lee Hudson

Installation Instructions
-------------------------
Unzip all the files and folders in the zip file to your local hard drive.


How to Use ETCC
---------------
1. Run the ETCC.exe application.
2. Enter the IP address of your ET series receiver in the IP Address field, example 192.168.1.5
If your using a private local IP address enter the IP like this: 010.000.000.001
3. If you have changed the password on your receiver, enter the password in the password field
otherwise leave blank.
4. Click Connect Button


Telnet
------
Self explanatory.
For a list of Busybox commands check out the following website:
[Only registered and activated users can see links. ]


FTP
---
Click the FTP Button.
This will load FileZilla FTP Client and automatically connect to your receiver.
For instructions on using FileZilla check out the following website:
[Only registered and activated users can see links. ]


Settings Backup
---------------
Click on Settings Backup Button.
Click the Backup Settings Button.
This will backup all the settings from the receiver to the enigma2, tuxbox and cfg folders on your PC HDD.
The enigma2, tuxbox and cfg folders will be located in the same folder as this program.

Click the Restore Settings Button.
All your backup data will be restored to the receiver.
Once the files have successfully been restored you'll need to reboot the receiver by powering off
and on using the switch on the back of the receiver.


Media Files Manager
-------------------
Uploading a Media File:
Select the Hard Drive and folder that contains your Media File.
Select the PVR device you have installed from the "Choose PVR Device" drop down window.
Click on the Local file or files you want to upload so it's highlighted in blue.
Click the Upload Button to transfer the file or files from your local HDD to the receiver.

Downloading a Media File:
Select the Hard Drive and folder that you wish the file or files to be transferred too.
Select the PVR device you have installed from the "Choose PVR Device" drop down window.
Click on the Remote file or files you want to download so it's highlighted in blue.
Click the Download Button to transfer the files from the receiver to your local HDD.

Deleting Local File:
Select Local file so it's highlighted in blue.
Click Delete Local File Button.

Deleting Remote File:
Select remote file so it's highlighted in blue.
Click Delete Remote File Button.


HDD Manager
---------------
To mount and format a Hard Disk Drive do the following:
Select the receiver type and Hard Disk type.
Click the Format Button.

This will erase all the data on the receiver's selected HDD.

Wait until the format has completed. It can take approx 10-15 minutes for a 1TB HDD.
You'll see a command prompt like one below when the format has completed.

root@et9x00>


WebControl
--------------
Click the WebControl Button to open WebControl in your default web browser.


Upload Channel List
-------------------
Select the local directory where the Channel List is sorted.
Double click the folder to list the files.
Click the "Upload Channel List" Button.
When you see the "Channel List Uploaded! Reboot receiver" message box appear click OK.
Now Reboot receiver by powering off and on.

IPK Installer
-------------
Click the "..." Button to select the local directory where the "ipk" file is located.
Now click the "Upload and Install IPK File" Button.
The selected "ipk" file will be transferred to the /tmp folder then installed.
Details of the installation will be viewable in the terminal window.


Version History:
----------------

Version 1.2 Released 15-01-2012

Updated Media Files Manager. Now you can upload or download multiple media files to and from the receiver.
Updated Settings Backup.